|
|
|
|
![]() |
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
|
BMW 3-Series (E90 E92) Forum
>
Please help my E91!! DIY for loom wires?
|
![]() |
| 03-29-2020, 12:42 PM | #1 |
|
Enlisted Member
![]() 11
Rep 31
Posts |
Hello everyone! This is my first thread in this forum. Hope to stay for a long time and help other members!
I have a 2008 E91 LCI (320 D). Got a very nice deal, despite a few electronic problems: - None of my key fob buttons work (lock/unlock/trunk), so I have to open the car manually. The central locking works fine on the dash button - Very often, when I unlock the car (with the metal key on the driver’s door), the rear trunk glass opens. However, micro switch never responds no matter what I do - The full trunk latch works fine, but sometimes it does not respond (bad contact?) - One of the rear parking lights (LED) does not work (the one in the trunk, left side). Everything else does (both reverse lights, 3rd brake light, brakes, blinkers) ![]() - The rear wiper does not work, but the washer does - The interior lights for the trunk do not light up ![]() ![]() My fuses seem to be ok. From what I read, this leads me to believe that either I need a new diversity module and/or the trunk wires are damaged in some way. And possibly a new key. In my garage, I was already able to remove the rear spoiler and expose the diversity module (looks very clean, no signs of rust). ![]() However, I can’t find any information on how to repair the wires or check where the problem comes from. Don’t want to cut the wire loom without proper confirmation. ![]() ![]() What should be my next step? Thank you in advance!!! |
![]() |
| Bookmarks |
| Tags |
| central locking, diversity module, e91, key fob, loom wire, trunk |
| Thread Tools | |
|
|