[Bmw330]

Run NCSexpert
Click "file" and select "load profile" and select "expertmode"
Click "VIN/ZCS/FA
Click "ZCS/FA f. ECU
Select chassis type "e89"
On choose ECU select "CAS"
After your vin is shown select "enter FA"
Select chassis type "e89"
Ensure VIN shown is correct and select "OK"
Enter $676 and then select "add"
Then scroll down and select "£676" and select "OK"
Then select "Back button"
Then select "F4 Process ECU"
Then select from drop down list "CAS"
Then select "F2 Change Job"
Then select "FA_WRITE" and click "OK"
Ensure CAS is shown on "Get Coded" and FA_WRITE shown on "JOB NAME"
Select "F3 Execute Job
Then select from drop down list "FRM"
Then select "F2 Change Job"
Then select "FA_WRITE" and click "OK"
Ensure FRM is shown on "Get Coded" and FA_WRITE shown on "JOB NAME"
Select "F3 Execute Job

Where/how do you find the following? CHOST/CAPPL/CGATE/CAUDI/CTUNE, I cant seem to find them.

I also have both FRM and NFRM?, does $676 need coding in both of these as well as CAS?